3 Review(s)

Environmental protection material : the table top is made of medium density fiberboard and solid wood particle board, the surface is smooth, non-toxic, not easy to stretch, moisture-proof, high temperature resistance, safety and environmental protection. Multi-functional hooks: these wall adhesive hooks can be applied to hang hats, calendars, keys, measuring spoons, cleaning tools, jewelry and other small accessories wherever you want without using nails or a hammer Suitable for all kinds of surfaces: the stick-on hook can be stuck to a variety of surfaces, like ceramic tile, refrigerator door, wardrobe, marble, wood tile, ceramic, mirror Installation steps are as follows: 1. Wipe the dust, grease on the wall with clean soft cloth and keep it fully dry. 2. Uncover barrier film on bottom layer. Don't touch sticking face with hand. 3. Position the position of sticking film, paste the patch affixed to the wall horizontally. 4. Flatten with force to the patch from inside to outside, press each region tightly to evacuate the air in the sticking patch. 5. Then install hanging rack and screw nut. 6. Check that the installation is against the wall. 7.After installation hanging any rack or other stuff after 1 hour.let it dry at 1 hour. Notice: 1. Please pay attention that there are limits on painted walls, otherwise it might damaged your paint. Avoid using on uneven surface, the more smooth the wall, the better the results. 2.This screw can hold up to 6kg. But we'd like to suggest no more than 6kg for holding a long time. 3. Please clean the adhesive surface with water if it has dust covered before installation the hook. 4. Do not use it at temperatures above 80 degrees.